Ready-to-use Cable Assemblies for Faster, Safer Installations

Pre-terminated power, control and data cable assemblies engineered for industrial performance and built to LAPP quality standards.

Speak to an Engineer Explore our eShop →

Browse featured cables

Choose your assembly type and application needs to see parts on the eShop with filters applied.

ETHERLINE LAN Cat.6A 1,5 WH

ETHERLINE LAN Cat.6A 1,5 WH
PATCHCORD CAT 6 F/UTP LSZH 0.5M GREY

PATCHCORD CAT 6 F/UTP LSZH 0.5M GREY
PATCHCORD CAT 6 F/UTP LSZH 1M GREY

PATCHCORD CAT 6 F/UTP LSZH 1M GREY
PATCHCORD CAT 6 F/UTP LSZH 5M ORANGE

PATCHCORD CAT 6 F/UTP LSZH 5M ORANGE
PATCHCORD CAT 6 F/UTP LSZH 10M ORANGE

PATCHCORD CAT 6 F/UTP LSZH 10M ORANGE
PATCHCORD CAT 6 F/UTP LSZH 5M GREY

PATCHCORD CAT 6 F/UTP LSZH 5M GREY
Speak to an Engineer Browse Standart Part (eShop)
Pre-terminated Cable Assemblies – Built for Fast, Error-free Installation

Pre-terminated cable assemblies give you plug-and-play connectivity for machines, sensors, drives and networks. Each assembly is factory-cut, connectorized and tested so you can install it immediately with consistent quality and zero on-site wiring.

Discover Our Cable Assemblies

Our assemblies range from power and control cables for motors and machines, to Ethernet, fieldbus and sensor/actuator assemblies for industrial networks. We also offer full customisation through ÖLFLEX CONNECT – from labelling and crimping to complete harness builds for OEMs and automation projects.

Where cable assemblies are used

01 Machines & Automation

Pre-terminated power and control cables for drives, sensors and industrial machines.

02 Industrial Networking

Ethernet, fieldbus and sensor/actuator assemblies for reliable industrial communication.

03 OEM & Custom Harnessing

Complete, ready-to-install harnesses for OEM equipment, panels and automation systems.

Speak to an Engineer
Explore our eShop →

Which essential requirements must a cable assembly meet?

The assembly must use connectors that match the equipment’s standards, such as M12, M8, RJ45, servo connectors or custom terminations. Correct pairing ensures reliable signal and power transfer.

Every assembly must deliver stable electrical performance with minimal signal loss or interference. This ensures reliable data transmission and consistent power delivery across industrial networks, automation systems, and machine interfaces.

Assemblies must withstand vibration, bending, abrasion, and exposure to industrial conditions. High-quality jackets and connectors protect the cable from mechanical stress and environmental factors, ensuring long service life in demanding applications.

Assemblies must be manufactured to the exact required length and provide secure strain relief to prevent pull-out or damage during installation. Proper strain relief protects terminations, maintains connector integrity, and supports long-term system reliability.

Resources & FAQ

Power & control assemblies: designed for motors, drives, and industrial automation – optimized for mechanical strength, oil resistance, and vibration.

Data assemblies: designed for Ethernet, fieldbus, and sensors – optimized for shielding, low attenuation, and signal integrity.

Pre-terminated assemblies require no internal maintenance.
Periodic inspection is recommended for:

  • Exposure to oil, heat, or vibration
  • Connector wear
  • Cable bending radius
  • Contact integrity

To provide an accurate quote, engineers typically need:

  • Connector type (e.g., M12, RJ45, servo, open end)
  • Cable type and application (power/control or data)
  • Length required
  • Quantity
  • Any customisation (labelling, bundling, special testing)